VILLA WORK SPECIFICATIONS- 1000 sqft AND ABOVE
1. EARTH WORK EXCAVATION:
Foundation Trenches Size is 60x60 cm, for all types of soil including cutting, Shoring, Strutting, dewatering etc. For column Foundation: 120 x 120 x 120 cm in Size for sit out column’s Dr rubble Foundation: 60 x 60 cm in Size
2. RCC COLUMN FOOTING FOR SIT OUT
Reinforced Cement Concrete 1:2:4 using 20MM the footing mat size 120cm x 120 cm Providing steel for mat 12 mm steel both way in standard design
3. RR BASEMENT WORK: RR BASEMENT:
45cm x 50cm fitting and packing of Rubble in cement mortar 1:7
4. RCC BELT:
Reinforced Cement Concrete in 1:2:4 as per Architectural Drawings, Size shall be 45 x 10 cm. providing Steel for belt 8 mm 2 nos top and 2 nos bottom, Ring 6mm providing 20cm c/c
5. FILLING IN BASEMENT:
Filling in basement shall be done with available Red Earth or Slurry Dust.
7. LATERATE (CHENKALLU) WORK:
Good Quality Laterite Masonry in 20cm thick; Cement Mortar in 1:7, Maximum height of wall is 3m.
8. PARAPET WORK:
75 cm height Single Brick Work shall be used for the Parapet Work.
9. PCC BELOW FLOORING:
Plain Cement Concrete 1:4:8 10 cm thickness
10. RCC COLUMNS FOR SIT OUT RCC
shall be build using 20mm Downgraded aggregates in M20 Mix column size 24 cm x 24cm. providing Steel 12 mm for vertical steel and ring is 8mm 18cm c/c
11. RCC BEAMS:
RCC Beams shall be build; using 20mm Downgraded aggregates in M20 Mix
12. RCC SLABS:
RCC Slabs with minimum 10CM thickness shall be build; using 20mm Downgraded aggregates in M20. Providing Steel Standard design
13. RCC SUN SHADES:
RCC Sun Shades shall be build; using 20mm Downgraded aggregates in M20 Mix 5 cm thickens
14. RCC STAIRS:
RCC Stairs shall be build; using 20mm Downgraded aggregates in M20 Mix
15. RCC LINTEL:
Lintel shall be build; using 20mm Downgraded aggregates in M20 Mix . Lintel Thickess is 15cm
16. REINFORCED STEEL:
Fixing Steel Reinforcement (High Yield Strength Deformed Bars Conforming to Fe 500)Kairali, Prince, Kalliyathu or Equalent will be use for R.C.C in all items, Work including transporting, recoiling, cutting, straightening, bending and placing in position at all levels & binding with approved gauge binding wire.
43 Graded Ordinary Portland cement or Portland Pozzolana Cement of Dalmia, Ramco, Malabar, shankar shall be used for Structure And All Rcc Work.
Good Quality Crushed M-Sand shall be used for all RCC and Super Structural Works, Good Quality River Sand or Crushed M-Sand which is specially graded for the plastering purpose shall be used for all plastering works as per the availability in the open Market.
19. JOINERY WORK (FRAMES WITH MS FLAT & RODS):
Good Quality Hard Wood (karivalakam) shall be used for all the windows and Door Frames in size of 10cmX 6.5cm. However the GF front door frame shall be in size of 15cm X 10cm with good quality Teak Wood (Front Door Only). All window frames shall be secured with Flat & 12 MM Rods and windows providing handle. For all Paneled and Glazed Shutters also Good Quality Hard Wood (karivelakam) shall be used
20. INSIDE PLASTERING WORK:
Inside Plastering Work shall be in Cement Mortar 1:5, 9 to 12 MM Thick
21. CEILING PLASTERING WORK:
Ceiling plastering work shall be in 1:4 Cement Mortar, below 10MM Thick.
22. OUTSIDE PLASTERING WORK:
Outside wall Plastering Work shall be in Cement Mortar 1:5, 12 to 15 MM Thick.
Stainless Steel Handrails shall be used in Staircase Areas and upper living Cut-Off Areas.
24. ELECTRICAL WORKS:
Cables:Finolex or V.Guard
Switches &Sockets: Modular Switches & Sockets from GM
Final Fittings such as Fancy Lightings & Ceiling Fans should be provided by the Client at Site.
25. PLUMBING AND SANITARY WORK:
Complete Plumbing and Sanitary Works shall be executed by the Contractor; Using the below mentioned Brands and rate
PVC Pipes: supreme, Star
CP Fittings: Good quality ISI specified Wall Mixer @Max.Rate: Rs.3000/- (for Master Toilet only)
Long Body Taps @Max.Rate: Rs.600/-
Health Faucets @Max.Rate: Rs.750/-
Angle Valves @Max.Rate: Rs.400/-
Shower Set @Max.Rate: Rs.1000/-
Pillar Taps Bathrooms @Max.Rate: Rs.600/-
Pillar Tap for Hall @Max.Rate: Rs.1200/-
Sink Taps @Max.Rate: Rs.1250/-
Sanitary: S Closet (Priced at Maximum Rate of Rs.8000/- per Piece) and Wash Basin from Cera.
Dining Area: Wash Basin for Dinning Area from Cera (Priced at Max. Rate of Rs.4000/)
Water Tank: Aqua-Tech, Sintex or Equivalent Quality of 1000 Liter Capacity
Kitchen Sink: Sink for Kitchen and 18 x 16 Sink for Work Area
26. FLOORING TILES:
Hi Gloss Nano Technology 60cm x 60cm Vitrified Tiles shall be used for all Carpet Areas; Except Bathrooms. (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.50/- per Sq.Ft)
27. SKIRTING TILE WORK:
Hi Gloss Nano Technology Vitrified Tiles shall be used for all Skirting portions (10Cm Height).
28. KITCHEN DADOING WALL TILES:
Dadoing tile Works shall be done above the kitchen slab with Good Quality tiles (Size: 45 x 30 Cms) (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.45/- per Sq.Ft)
29. KITCHEN TOP:
Good Quality Granite Slabs Shall be used for the Kitchen Top. (Priced at Max.Rate of Rs.200/- per Sft)
30. BATHROOM FLOORING TILES:
Good Quality Anti-Skid Tiles shall be used for all Bathrooms. Size: 30 x 30 Cms. (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.45/- per Sq.Ft)
31. BATHROOM WALL TILES:
Good Quality Bathroom Wall Tiles (Size: 45 x 30 Cms) of High lighter Model upto a maximum height of 7 Feet shall be Used (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.40/- per 45/ Sq.Ft)
32. ROOF TILES:
Providing and fixing good quality roof tiles of Rs. 25laying charges included
33. BATHROOM DOORS:
All Bathroom Doors Shall be done using Branded Fiber Doors. (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.2500/- per Door)
34. WOODEN POLISH:
Front Wooden Door Surfaces shall be polished with Good Quality sealer,
35. PAINTING WORK:
Providing two layer putty in Front elevation and living area only
One Coat White Cement Washing shall be used all over the Plastered Area,
Two coat of Emulsion finishing with approved colour.
Other Doors and windows shall be finished with enamel paint.
36. FRONT DOOR – BED ROOM DOORS – KITCHEN DOORS:
Front Door Teak wood, Bed Room Doors shall be Ferro Door or readymade skin door. Kitchen outer doors shall be made with Standard Size of Good Quality Teak wood.
37. WOODEN FITIINGS:
All Wooden Fittings like Hinges, Tower Bolts and Mortise Lock shall be provided from Branded Companies having Stainless Matt Finish. Whereas the Front Door Fittings shall be of Brass. (Max.Rate for Front Door Lock: Rs.2500/- and All other Door Locks: Rs.800/-)
38. OPEN WELL:
“7” Vattam Maximum up to “10” Kol depth– includingExcavation and concrete ring providing and fixing.
Stone drilling and other works in Hard stratum will be extra.
39. COMPOUND WALL WITH GATE:
Foundation with DR Masonry in 45x45 cm, wall with hollow bricks maximum 120 cm height, Gate up to 360 cm width for 6 cent plotperimeters. More than 6 cent will be chargeable extra.
40. STAIRCASE & BALCONY HANDRAIL:
Providing stainless steel hand rail in standard design
41. SEPTIC TANK & WATER DRAINAGE SOCK PITS:
Septic Tank & Water Drainage Sock Pits shall be made as per the standard Size & Capacity.
Note: The works not mentioned in this specification will be treated as extra and charged additional. The additional measurements other than mentioned above will be chargeable.
All documentation contractor providing to client - Building Permit, Building completion plans, Building No: and 3D Elevation.