Dream Valley

DREAM VALLEY the project situated in Mannarkkad, Palakkad District, Kerala. DREAM VALLEY the Project has designed in 7 Acres Land with 57 House Plots. Out of this, we were planned during the launching time to do House Construction in 20 Plots and the same having been under progress. This Construction segments’ consists of 650 Sqfts to 2,500 Sqfts. At the time-being almost all the Constructions are at final stage and READY TO OCCUPY. Out of the above mentioned Constructions, just 5 Villas are balance for sale at the moment and all others have already been reserved by our respected customers by making periodical advances as per our Construction Schedule. All the balance 37 Plots have already sold-out as Land Sale and most of our, such customers are ready now to build houses under our Construction Authority & Responsibility. Fifty percentage of such customers are willing to do constructions for their own purposes and the other fifty percentage are willing now to do construction as an Investment benefit similar like you. Why our Land Investment Customers are gradually becoming to do Construction is because of their anticipatory benefit in future on the basis of the under-going progress of our Project Development activities like Road Formation, Road Tarring, Continuous Project maintenances, Guardian based Alertness in Projects even though most of the areas are sold-out. We do hope the above explained tips are fair enough to satisfy you to become our valid customer on Investment Basis (Construction).

SALIENT FEATURES OF DREAM VALLEY

  • Green and pollution free environment
  • Wide internal road
  • Common gardens, park and play area
  • Build your dream home prestigious residential land mark of mannarkkad
  • All facilities within your reach
  • Security of premium housing colony
  • Just 5 minutes drive from mannarkkad
  • Well connected with road, rail and air destinations
Information Will be coming Soon
Information Will be coming Soon

Quick Enquiry

Floor Plan A
no img
Floor Plan B
no img

Amenities

Information Will be coming Soon

VILLA WORK SPECIFICATIONS- 1000 sqft AND ABOVE

1. EARTH WORK EXCAVATION
Foundation Trenches Size is 60x60 cm, for all types of soil including cutting, Shoring, Strutting, dewatering etc. For column Foundation: 120 x 120 x 120 cm in Size for sit out column’s Dr rubble Foundation: 60 x 60 cm in Size

2. RCC COLUMN FOOTING FOR SIT OUT

Reinforced Cement Concrete 1:2:4 using 20MM the footing mat size 120cm x 120 cm Providing steel for mat 12 mm steel both way in standard design

3. RR BASEMENT WORK: RR BASEMENT

45cm x 50cm fitting and packing of Rubble in cement mortar 1:7

4. RCC BELT
Reinforced Cement Concrete in 1:2:4 as per Architectural Drawings, Size shall be 45 x 10 cm. providing Steel for belt 8 mm 2 nos top and 2 nos bottom, Ring 6mm providing 20cm c/c

5. FILLING IN BASEMENT

Filling in basement shall be done with available Red Earth or Slurry Dust.

6. LATERATE (CHENKALLU) WORK
Good Quality Laterite Masonry in 20cm thick; Cement Mortar in 1:7, Maximum height of wall is 3m.

7. PARAPET WORK
75 cm height Single Brick Work shall be used for the Parapet Work.
   
8. PCC BELOW FLOORING
Plain Cement Concrete 1:4:8 10 cm thickness

9. RCC COLUMNS FOR SIT OUT RCC
shall be build using 20mm Downgraded aggregates in M20 Mix column size 24 cm x 24cm. providing Steel 12 mm for vertical steel and ring is 8mm 18cm c/c

10. RCC BEAMS
RCC Beams shall be build; using 20mm Downgraded aggregates in M20 Mix

11. RCC SLABS
RCC Slabs with minimum 10CM thickness shall be build; using 20mm Downgraded aggregates in M20. Providing Steel Standard design

12. RCC SUN SHADES

RCC Sun Shades shall be build; using 20mm Downgraded aggregates in M20 Mix 5 cm thickens

13. RCC STAIRS

RCC Stairs shall be build; using 20mm Downgraded aggregates in M20 Mix

14.  RCC LINTEL
Lintel shall be build; using 20mm Downgraded aggregates in M20 Mix . Lintel Thickess is 15cm

15. REINFORCED STEEL

Fixing Steel Reinforcement (High Yield Strength Deformed Bars Conforming to Fe 500)Kairali, Prince, Kalliyathu or Equalent will be use for R.C.C in all items, Work including transporting, recoiling, cutting, straightening, bending and placing in position at all levels & binding with approved gauge binding wire.

16. CEMENT

43 Graded Ordinary Portland cement or Portland Pozzolana Cement of Dalmia, Ramco, Malabar, shankar shall be used for Structure And All Rcc Work. 

17. SAND

Good Quality Crushed M-Sand shall be used for all RCC and Super Structural Works, Good Quality River Sand or Crushed M-Sand which is specially graded for the plastering purpose shall be used for all plastering works as per the availability in the open Market.

18. JOINERY WORK (FRAMES WITH MS FLAT & RODS)

Good Quality Hard Wood (karivalakam) shall be used for all the windows and Door Frames in size of 10cmX 6.5cm. However the GF front door frame shall be in size of 15cm X 10cm with good quality Teak Wood (Front Door Only). All window frames shall be secured with Flat & 12 MM Rods and windows providing handle. For all Paneled and Glazed Shutters also Good Quality Hard Wood (karivelakam) shall be used

19. INSIDE PLASTERING WORK

Inside Plastering Work shall be in Cement Mortar 1:5, 9 to 12 MM Thick

20. CEILING PLASTERING WORK
Ceiling plastering work shall be in 1:4 Cement Mortar, below 10MM Thick.

21. OUTSIDE PLASTERING WORK
Outside wall Plastering Work shall be in Cement Mortar 1:5, 12 to 15 MM Thick.

22. HANDRAILS

Stainless Steel Handrails shall be used in Staircase Areas and upper living Cut-Off Areas.

23. ELECTRICAL WORKS 

  • Cables: Finolex or V.Guard
  • Switches &Sockets: Modular Switches & Sockets from GM
  • Final Fittings such as Fancy Lightings & Ceiling Fans should be provided by the Client at Site.

24. PLUMBING AND SANITARY WORK

  • Complete Plumbing and Sanitary Works shall be executed by the Contractor; Using the below mentioned Brands and rate
  • PVC Pipes: supreme, Star
  • CP Fittings: Good quality ISI specified Wall Mixer @Max.Rate: Rs.3000/-  (for Master Toilet only)
  • Long Body Taps @Max.Rate: Rs.600/-
  • Health Faucets @Max.Rate: Rs.750/-
  • Angle Valves @Max.Rate: Rs.400/-
  • Shower Set @Max.Rate: Rs.1000/-
  • Pillar Taps Bathrooms @Max.Rate: Rs.600/-
  • Pillar Tap for Hall @Max.Rate: Rs.1200/-
  • Sink Taps @Max.Rate: Rs.1250/-


Sanitary

S Closet (Priced at Maximum Rate of Rs.8000/- per Piece) and Wash Basin from Cera.
Dining Area: Wash Basin for Dinning Area from Cera (Priced at Max. Rate of Rs.4000/)

Water Tank
Aqua-Tech, Sintex or Equivalent Quality of 1000 Liter Capacity

Kitchen Sink
Sink for Kitchen and 18 x 16 Sink for Work Area

25. FLOORING TILES
Hi Gloss Nano Technology 60cm x 60cm Vitrified Tiles shall be used for all Carpet Areas; Except Bathrooms. (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.50/- per Sq.Ft)

26. SKIRTING TILE WORK
Hi Gloss Nano Technology Vitrified Tiles shall be used for all Skirting portions (10Cm Height).

27. KITCHEN DADOING WALL TILES
Dadoing tile Works shall be done above the kitchen slab with Good Quality tiles (Size: 45 x 30 Cms) (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.45/- per Sq.Ft)

28. KITCHEN TOP

Good Quality Granite Slabs Shall be used for the Kitchen Top. (Priced at Max.Rate of Rs.200/- per Sft)

29. BATHROOM FLOORING TILES
Good Quality Anti-Skid Tiles shall be used for all Bathrooms. Size: 30 x 30 Cms. (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.45/- per Sq.Ft)

30. BATHROOM WALL TILES
Good Quality Bathroom Wall Tiles (Size: 45 x 30 Cms) of High lighter Model upto a maximum height of 7 Feet shall be Used (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.40/- per 45/ Sq.Ft)

31. ROOF TILES
Providing and fixing good quality roof tiles of Rs. 25laying charges included

32. BATHROOM DOORS
All Bathroom Doors Shall be done using Branded Fiber Doors. (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.2500/- per Door)

33. WOODEN POLISH
Front Wooden Door Surfaces shall be polished with Good Quality sealer,

34. PAINTING WORK

Putty Work
Providing two layer putty in Front elevation and living area only

Painting

  • One Coat White Cement Washing shall be used all over the Plastered Area,
  • Two coat of Emulsion finishing with approved colour.
  • Other Doors and windows shall be finished with enamel paint.


35. FRONT DOOR – BED ROOM DOORS – KITCHEN DOORS

Front Door Teak wood, Bed Room Doors shall be Ferro Door or readymade skin door. Kitchen outer doors shall be made with Standard Size of Good Quality Teak wood.

36. WOODEN FITIINGS
All Wooden Fittings like Hinges, Tower Bolts and Mortise Lock shall be provided from Branded Companies having Stainless Matt Finish. Whereas the Front Door Fittings shall be of Brass. (Max.Rate for Front Door Lock: Rs.2500/- and All other Door Locks: Rs.800/-)

37. OPEN WELL
“7” Vattam Maximum up to “10” Kol depth– includingExcavation and concrete ring providing and fixing.
Stone drilling and other works in Hard stratum will be extra.

38. COMPOUND WALL WITH GATE
Foundation with DR Masonry in 45x45 cm, wall with hollow bricks maximum 120 cm height, Gate up to 360 cm width for 6 cent plotperimeters. More than 6 cent will be chargeable extra.

39. STAIRCASE & BALCONY HANDRAIL
Providing stainless steel hand rail in standard design

40. SEPTIC TANK & WATER DRAINAGE SOCK PITS
Septic Tank & Water Drainage Sock Pits shall be made as per the standard Size & Capacity.

VILLA WORK SPECIFICATIONS- BELOW 1000 sqft 

1. EARTH WORK EXCAVATION
Foundation Trenches Size is 60x60 cm, for all types of soil including cutting, Shoring, Strutting, dewatering etc. For column Foundation: 120 x 120 x 120 cm in Size for sit out column’s Dr rubble Foundation: 60 x 60 cm in Size

2. RCC COLUMN FOOTING FOR SIT OUT

Reinforced Cement Concrete 1:2:4 using 20MM the footing mat size 120cm x 120 cm Providing steel for mat 12 mm steel both way in standard design , with 4 numbers 12mm steel bars for column

3. RR BASEMENT WORK: RR BASEMENT

45cm x 50cm fitting and packing of Rubble in cement mortar 1:7

4. RCC BELT
Reinforced Cement Concrete in 1:2:4 as per Architectural Drawings, Size shall be 45 x 10 cm. providing Steel for belt 8 mm 2 nos top and 2 nos bottom, Ring 6mm providing 20cm c/c

5. FILLING IN BASEMENT

Filling in basement shall be done with available Red Earth or Slurry Dust.

6. LATERATE (CHENKALLU) WORK
Good Quality Laterite Masonry in 20cm thick; Cement Mortar in 1:7, Maximum height of wall is 3m.

7. PARAPET WORK
75 cm height Single Brick Work shall be used for the Parapet Work.
   
8. PCC BELOW FLOORING
Plain Cement Concrete 1:4:8 10 cm thickness

9. RCC COLUMNS FOR SIT OUT RCC

shall be build using 20mm Downgraded aggregates in M20 Mix column size 24 cm x 24cm. providing Steel 12 mm for vertical steel and ring is 8mm 18cm c/c

10. RCC BEAMS

RCC Beams shall be build; using 20mm Downgraded aggregates in M20 Mix , as per
The structural drawing

11. RCC SLABS

RCC Slabs with minimum 10CM thickness shall be build; using 20mm 
Downgraded aggregates in M20. Providing Steel Standard design as per
The structural drawing
 
12. RCC SUN SHADES
RCC Sun Shades shall be build; using 20mm Downgraded aggregates in M20 Mix 5 cm thickens

13. RCC STAIRS
RCC Stairs shall be build; using 20mm Downgraded aggregates in M20 Mix

14. RCC LINTEL
 Lintel shall be build; using 20mm Downgraded aggregates in M20 Mix . Lintel Thickess is 15cm

15. REINFORCED STEEL
Fixing Steel Reinforcement (High Yield Strength Deformed Bars Conforming to Fe 500)Kairali, Prince, Kalliyathu,bharath will be use for R.C.C in all items, Work including transporting, recoiling, cutting, straightening, bending and placing in position at all levels & binding with approved gauge binding wire.

16. CEMENT
43 Graded Ordinary Portland cement or Portland Pozzolana Cement of Dalmia, Ramco, Malabar, shankar shall be used for Structure And All Rcc Work. 

17. SAND

Good Quality Crushed M-Sand shall be used for all RCC and Super Structural Works, Good Quality River Sand or Crushed M-Sand which is specially graded for the plastering purpose shall be used for all plastering works as per the availability in the open Market.

18. JOINERY WORK (FRAMES WITH MS FLAT & RODS)

Good Quality Hard Wood (karivalakam) shall be used for all the windows and Door Frames in size of 10cmX 6.5cm. However the GF front door frame shall be in size of 15cm X 10cm with good quality Teak Wood (Front Door Only). All window frames shall be secured with Flat & 12 MM Rods and windows providing handle. For all Paneled and Glazed Shutters also Good Quality Hard Wood (karivelakam) shall be used

19. INSIDE PLASTERING WORK
Inside Plastering Work shall be in Cement Mortar 1:5, 9 to 12 MM Thick

20. CEILING PLASTERING WORK
Ceiling plastering work shall be in 1:4 Cement Mortar, below 10MM Thick.

21. OUTSIDE PLASTERING WORK
Outside wall Plastering Work shall be in Cement Mortar 1:5, 12 to 15 MM Thick.

22. HANDRAILS

Stainless Steel Handrails shall be used in Staircase Areas and upper living Cut-Off Areas.

23. ELECTRICAL WORKS
Cables: polycab, hawels  or Finolex 
Switches &Sockets: Modular Switches & Sockets from GM
Final Fittings such as Fancy Lightings & Ceiling Fans should be provided by the Client at Site.

24. PLUMBING AND SANITARY WORK

  • Complete Plumbing and Sanitary Works shall be executed by the Contractor; Using the below mentioned Brands and rate for every bathroom that included in the plan
  • PVC Pipes: supreme, Star
  • CP Fittings: Good quality ISI specified Wall Mixer @Max.Rate: Rs.3000/-  (for Master Toilet only)
  • Long Body Taps @Max.Rate: Rs.600/-
  • Health Faucets @Max.Rate: Rs.750/-
  • Angle Valves @Max.Rate: Rs.400/-
  • Shower Set @Max.Rate: Rs.1000/-
  • Pillar Taps Bathrooms @Max.Rate: Rs.600/-
  • Pillar Tap for Hall @Max.Rate: Rs.1200/-
  • Sink Taps @Max.Rate: Rs.1250/-
  • Sanitary: S Closet (Priced at Maximum Rate of Rs.8000/- per Piece) and Wash Basin from Cera.
  • Dining Area: Wash Basin for Dinning Area from Cera (Priced at Max. Rate of Rs.4000/)
  • Water Tank: Aqua-Tech, Sintex or Equivalent Quality of 1000 Liter Capacity
  • Kitchen Sink: Sink for Kitchen and 18 x 16 Sink for Work Area


25. FLOORING TILES

Hi Gloss Nano Technology 60cm x 60cm Vitrified Tiles shall be used for all Carpet Areas; Except Bathrooms. (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.40/- per Sq.Ft)

26. SKIRTING TILE WORK
Hi Gloss Nano Technology Vitrified Tiles shall be used for all Skirting portions (10Cm Height).

27. KITCHEN DADOING WALL TILES
Dadoing tile Works shall be done above the kitchen slab with Good Quality tiles (Size: 45 x 30 Cms) (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.40/- per Sq.Ft)

28. KITCHEN TOP
Good Quality Granite Slabs Shall be used for the Kitchen Top. (Priced at Max.Rate of Rs.150/- per Sft)

29. BATHROOM FLOORING TILES
Good Quality Anti-Skid Tiles shall be used for all Bathrooms. Size: 30 x 30 Cms. (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.40/- per Sq.Ft)

30. BATHROOM WALL TILES
Good Quality Bathroom Wall Tiles (Size: 45 x 30 Cms) of High lighter Model upto a maximum height of 7 Feet shall be Used (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.40/- perSq.Ft)

31. BATHROOM DOORS
All Bathroom Doors Shall be done using Branded Fiber Doors. (Choice of Design, Colour& Brand as per the Client; Priced at Maximum Rate of Rs.2500/- per Door)

32. WOODEN POLISH

Front Wooden Door Surfaces shall be polished with Good Quality sealer,

33. PAINTING WORK

  • Putty Work
  • Providing two layer putty in Front elevation and living area only
  • Painting
  • One Coat White Cement Washing shall be used all over the Plastered Area,
  • Two coat of Emulsion finishing with approved colour.
  • Other Doors and windows shall be finished with enamel paint.


34. FRONT DOOR – BED ROOM DOORS – KITCHEN DOORS
Front Door Teak wood, Bed Room Doors shall be Ferro Door or readymade skin door. Kitchen outer doors shall be made with Standard Size of Good Quality Teak wood.

35. WOODEN FITIINGS

All Wooden Fittings like Hinges, Tower Bolts and Mortise Lock shall be provided from Branded Companies having Stainless Matt Finish. Whereas the Front Door Fittings shall be of Brass. (Max.Rate for Front Door Lock: Rs.2500/- and All other Door Locks: Rs.800/-)

36. OPEN WELL

“7” Vattam Maximum up to “10” Kol depth– includingExcavation and concrete ring providing and fixing.
Stone drilling and other works in Hard stratum will be extra.

37. COMPOUND WALL WITH GATE
Foundation with DR Masonry in 45x45 cm, wall with hollow bricks maximum 120 cm height, Gate up to 360 cm width for 5 cent plotperimeters. More than 6 cent will be chargeable extra.

38. STAIRCASE & BALCONY HANDRAIL

Providing stainless steel hand rail in standard design

39. SEPTIC TANK & WATER DRAINAGE SOCK PITS
Septic Tank & Water Drainage Sock Pits shall be made as per the standard Size & Capacity.

 

Information Will be coming Soon
Information Will be coming Soon

+91 9667681500